Woodwork

Decided today to carry on with the Teac.

sides off

Stripped it of its’ sides. It’s a well-built machine.

oil soap

Pre-work, ready to be cleaned.

wiped down

Cleaned up, and dried off.

prep

Preparation to oil the veneer.

upside down

Odd angle but, applying the Tung oil.

freshly oiled

Letting the oil soak in.

shiny

Left until tacky then buffed down to a uniform finish. Typically this attracts lint, which will mostly come out once it’s drier later, with a second buffing. I think, looking at it, that’ll be adequate as it’s come up nicely.

Leave a Reply